I got it built. About 3 hours including breaks and watching the news. A little bit fiddly in places and a lack of instructions (though there are videos on Youtube) were minor problems. It was fairly easy to work out what went where. The photos show the size (figures are Perry 28's, Eureka 18's mounted and PSC 15's) and the amount of light the LED strips give off- I turned the flash off for the two top photos. I don't think a third LED strip is needed, but there's room for it. It was pissing down when the photos were taken and no useable light coming in the windows. You'll need a USB adaptor or power board with USB outputs to fire up the LEDs.
The good old days of painting- explaining to the wife how red paint got on her new couch or, even worse, how Humbrol dark green got on Mum's carpet.... Never been to Middlesbrough, but can see someone else's being used in a game of Necromunda.
Doug, without paint, etc, loaded up it's quite stable and requires a good knock to fall over. With paint and tools on top it would probably go over more easily. I'm not going to use the boxes as legs- it's high enough for me, even if building 1/32 kits, and the boxes would make it more prone to tip, I think.
What's on your workbench?
Re: What's on your workbench?
- Attachments
-
- T_Halo8.JPG (55.37 KiB) Viewed 1586 times
-
- T_Halo6.JPG (50.89 KiB) Viewed 1586 times
-
- T_Halo4.JPG (49.81 KiB) Viewed 1586 times
If "The System" is the answer, who asked such a bloody stupid question?
Re: What's on your workbench?
not sure the Memsahib would be happy with that on my desk in the family room... the LED might spoil the picture from Bridgerton
Camouflaged as a rose arch perhaps..
Camouflaged as a rose arch perhaps..
Re: What's on your workbench?
Cover it with some flower wall paper and put some incense sticks on top, mate, and you may get away with it. Something like this, perhaps:
- Attachments
-
- T_wallpapered.jpg (115.02 KiB) Viewed 1543 times
If "The System" is the answer, who asked such a bloody stupid question?
Re: What's on your workbench?
I've got some more 15mm SYW on the go this week; namely the British 1st (King's) Dragoon Guards, Prussian Jager zu Fuss and the Imperial 'Alt-Wurttemberg' Regiment:
My wargames blog: http://www.jemimafawr.co.uk/
Re: What's on your workbench?
Like those
There is no point in being stupid if you don't show it!
www.talesfromghq.blogspot.co.uk
www.talesfromrhanzlistan.blogspot.co.uk
www.talesfromghq.blogspot.co.uk
www.talesfromrhanzlistan.blogspot.co.uk
Re: What's on your workbench?
Nice, Mark. Good to see the RA Württemburger regiment get done.
If "The System" is the answer, who asked such a bloody stupid question?
Re: What's on your workbench?
Cheers chaps! Yes, I'm slowly working my way through the Reichsarmee. I've just finished the II. Bn of the Pfalz Garde zu Fuss today and now have the Baden-Baden Regiment (2 bns) under the brush, with the Baden-Durlach Regt to follow. Then I think it'll be on to the Hanoverian cavalry.
My wargames blog: http://www.jemimafawr.co.uk/
Re: What's on your workbench?
Promised myself I would try and get a platoon done for Chain of Command in a week. On track with 2 days to go.. contrast paints help.
- BaronVonWreckedoften
- Grizzly Madam
- Posts: 9242
- Joined: Thu Sep 14, 2017 5:32 pm
- Location: The wilds of Surrey
Re: What's on your workbench?
Which platoon is this, Doug?
Kein Plan überlebt den ersten Kontakt mit den Würfeln. (No plan survives the first contact with the dice.)
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
- Buff Redux
- PurpleBot
- Posts: 726
- Joined: Mon Jan 25, 2021 9:20 am
Re: What's on your workbench?
Colossus for Oathmark, he's 110mm tall