What's on your workbench?
- levied troop
- Grizzly Madam
- Posts: 3760
- Joined: Tue Sep 12, 2017 7:05 pm
- Location: I’m in the phone box, the one across the hall
Re: What's on your workbench?
I like the colour you’ve got on those, mine looked a little too bright and glossy (I usually claim it’s just been raining).
I get lockdown, but I get up again.
- Buff Orpington
- Grizzly Madam
- Posts: 3522
- Joined: Tue Sep 12, 2017 8:26 pm
Re: What's on your workbench?
Spent yesterday evening assembling Perry plastic infantry from the War of Colonial Ingratitude. The figures are fine but the instructions could be better. Basically you get shown that each figure needs two arms and a hat plus an optional blanket roll. That's fine for the rank and file but the command sprue is a guessing game. The drummer is easy enough but does he get the hanger that is in his section? There are two standards but only one figure has a cup for one? One figure has a powder horn but no cartridge box. Should he carry the fusil?
I know when to go out
I know when to stay in
Get things done
I know when to stay in
Get things done
- BaronVonWreckedoften
- Grizzly Madam
- Posts: 9405
- Joined: Thu Sep 14, 2017 5:32 pm
- Location: The wilds of Surrey
Re: What's on your workbench?
Herbidacious!!!
(For those who recall a certain 1960s Watch with Mother programme.....)
Kein Plan überlebt den ersten Kontakt mit den Würfeln. (No plan survives the first contact with the dice.)
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
-
- Jezebel
- Posts: 3128
- Joined: Fri Oct 04, 2019 6:09 pm
Re: What's on your workbench?
iI all. the palm trees are from a Chinese vendor, packs of 15 mixed, and the link is on my blog page.
https://aleadodyssey.blogspot.com/2020/ ... ungle.html
The bases were hand cut from 3mm MDF (I used 3mm mainly because that was what I had available, but also because the extra depth gives better connections when you're pushing stuff into holes in the bases.)
Colour was airbrushed using a base of Tamiya Dark Green XF61, then mixed with Tamiya Nato green, then mixed with Tamiya Desert Yellow for highlights (which aren't showing very well in this pic).
I'll brush off the loose herbs, add some creepers, seal and add some very simple highlighting to the scatter. But it will have to wait until i buy some more paint, I used pretty much two Tamiya paint bottles on this.
https://aleadodyssey.blogspot.com/2020/ ... ungle.html
The bases were hand cut from 3mm MDF (I used 3mm mainly because that was what I had available, but also because the extra depth gives better connections when you're pushing stuff into holes in the bases.)
Colour was airbrushed using a base of Tamiya Dark Green XF61, then mixed with Tamiya Nato green, then mixed with Tamiya Desert Yellow for highlights (which aren't showing very well in this pic).
I'll brush off the loose herbs, add some creepers, seal and add some very simple highlighting to the scatter. But it will have to wait until i buy some more paint, I used pretty much two Tamiya paint bottles on this.
-
- Jezebel
- Posts: 3128
- Joined: Fri Oct 04, 2019 6:09 pm
Re: What's on your workbench?
I had similar questions and then decided I was overthinking it. So I figured there weren't enough cups in stock to go round.. that some old-fashioned sorts might like to retain a powder horn for good quality powder for the pan, and the drummer can go hang.. (or not).Buff Orpington wrote: ↑Tue Jan 28, 2020 8:23 am Spent yesterday evening assembling Perry plastic infantry from the War of Colonial Ingratitude. The figures are fine but the instructions could be better. Basically you get shown that each figure needs two arms and a hat plus an optional blanket roll. That's fine for the rank and file but the command sprue is a guessing game. The drummer is easy enough but does he get the hanger that is in his section? There are two standards but only one figure has a cup for one? One figure has a powder horn but no cartridge box. Should he carry the fusil?
- BaronVonWreckedoften
- Grizzly Madam
- Posts: 9405
- Joined: Thu Sep 14, 2017 5:32 pm
- Location: The wilds of Surrey
Re: What's on your workbench?
Hi Buff/Shah,
When looking at the rear of the sprue, the officers/ensigns are the figures with the longer coats; the sergeants and the drummer all have much shorter coat tails. Alan Perry seems convinced that, for the Saratoga campaign, officers retained their cocked hats, rather than the light infantry/dragoon style crested hat-cap worn by the rank-and-file, so there aren't enough of these for the officers as well. I'm not so sure, as it would have marked them out too much, but hey-ho......
Anything else?
Yes, the sprue is actually quite well laid out in that respect.Buff Orpington wrote: ↑Tue Jan 28, 2020 8:23 am That's fine for the rank and file but the command sprue is a guessing game. The drummer is easy enough but does he get the hanger that is in his section?
If you are referring to the cylinder one of the officers carries on his right hip, that is a container/canteen, not a cup for the standard pole (the arms wouldn't let you position the pole there anyway); colour belts were not introduced until the end of the century.Buff Orpington wrote: ↑Tue Jan 28, 2020 8:23 am There are two standards but only one figure has a cup for one?
He also has a bullet bag underneath the horn, so yes.Buff Orpington wrote: ↑Tue Jan 28, 2020 8:23 am One figure has a powder horn but no cartridge box. Should he carry the fusil?
When looking at the rear of the sprue, the officers/ensigns are the figures with the longer coats; the sergeants and the drummer all have much shorter coat tails. Alan Perry seems convinced that, for the Saratoga campaign, officers retained their cocked hats, rather than the light infantry/dragoon style crested hat-cap worn by the rank-and-file, so there aren't enough of these for the officers as well. I'm not so sure, as it would have marked them out too much, but hey-ho......
Anything else?
Kein Plan überlebt den ersten Kontakt mit den Würfeln. (No plan survives the first contact with the dice.)
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Re: What's on your workbench?
Hephalumps for the Shiny Sticks project.
- Buff Orpington
- Grizzly Madam
- Posts: 3522
- Joined: Tue Sep 12, 2017 8:26 pm
Re: What's on your workbench?
Brendan, thanks for the information. That helps a lot.
I know when to go out
I know when to stay in
Get things done
I know when to stay in
Get things done
- BaronVonWreckedoften
- Grizzly Madam
- Posts: 9405
- Joined: Thu Sep 14, 2017 5:32 pm
- Location: The wilds of Surrey
Re: What's on your workbench?
My pleasure - nice to see someone else getting into AWI.
Kein Plan überlebt den ersten Kontakt mit den Würfeln. (No plan survives the first contact with the dice.)
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Re: What's on your workbench?
More SYW troops, probably for Ayton. I know I've got enough, but I can't seem to stop myself.
Why us? Cos we're 'ere lad, nobody else.