What's on your workbench?

For your Wargames Wittering
DougM
PurpleBot
Posts: 835
Joined: Tue Jul 20, 2021 9:35 pm

Re: What's on your workbench?

Post by DougM »

Interesting. I picked up their Aussies. Did you have a set of rules in mind?
tim.w
Jezebel
Posts: 2899
Joined: Wed Sep 13, 2017 2:21 am
Location: York

Re: What's on your workbench?

Post by tim.w »

Yes Tim H has the Aussies all painted beautifully. I'm currently trying to get the right greens, some garish examples online of some very bright green marines! I'm thinking medium olive base, wash with sepia, then dry brush golden olive and a bit of buff to dust.

Rules wise, either our own for Khumbahyah or I might pick up the BOHICA rules from Empress at Vappa for a look. This won't be a huge project so wouldn't want more than a platoon. I looked at the Lardy offering but it was multiple platoons. There are lots of options out there and some free downloads I've seen.
DougM
PurpleBot
Posts: 835
Joined: Tue Jul 20, 2021 9:35 pm

Re: What's on your workbench?

Post by DougM »

I did a sample figure for the Aussies just using a base of olive drab. The Jungle Greens came in all shades, from the pretty intense hues for the 'Nashos' - and then the old sweats would be in heavily stained and faded outfits.

Like you, I don't want this to be a huge project. I picked up 'Charlie Don't Surf' from the Lardies, and again like you, was put off by the scale (company). I've heard some good things about BOHICA, but in the meantime, (well, after much more painting) I thought I would try out the Chain of Command modifications 'DMZ' by Jason Sendjirjan. available in dropbox here: https://www.dropbox.com/sh/yu90w0q8dp33 ... b-BHa?dl=0
User avatar
Paul
Grizzly Madam
Posts: 4627
Joined: Fri Oct 13, 2017 11:39 pm

Re: What's on your workbench?

Post by Paul »

There is also "Danger Close" available from Empress.
I've got some NVA that I was going to paint as regular Africans to provide support for the insurgents against the Rhodeleland forces.
User avatar
Tim Hall
Gaynor
Posts: 1279
Joined: Wed Sep 13, 2017 12:28 am
Location: Suffolk, in the heart of Merry Olde England

Re: What's on your workbench?

Post by Tim Hall »

tim.w wrote: Sun Jan 08, 2023 1:57 pm Yes Tim H has the Aussies all painted beautifully. I'm currently trying to get the right greens, some garish examples online of some very bright green marines! I'm thinking medium olive base, wash with sepia, then dry brush golden olive and a bit of buff to dust.

.
Whiskey, Vallejo US Dark Green 70.893 gives quite a good green for Nam fatigues. The hard part with the Yanks is getting the leaf pattern helmet covers right.
Rules? You ask me what rules do I use. No, I don't do rules.
User avatar
Spanner
Gaynor
Posts: 1163
Joined: Thu Oct 07, 2021 6:02 pm
Location: NSW south coast

Re: What's on your workbench?

Post by Spanner »

New greens:
guard.jpg
guard.jpg (45.78 KiB) Viewed 653 times
Used greens:
trio.jpg
trio.jpg (24.92 KiB) Viewed 653 times
Old, comfortable greens:
davejohn.jpg
davejohn.jpg (18.63 KiB) Viewed 653 times
Not from VN- I was luckily too young for that- but from '75 to '82 we were still wearing the same kit- greens, GP's, webbing and packs- worn by 1ATF post-1968.
If "The System" is the answer, who asked such a bloody stupid question?
DougM
PurpleBot
Posts: 835
Joined: Tue Jul 20, 2021 9:35 pm

Re: What's on your workbench?

Post by DougM »

Used greens got a lot paler than that in VN. I had a load of mates who served and seen the holiday snaps.
User avatar
Spanner
Gaynor
Posts: 1163
Joined: Thu Oct 07, 2021 6:02 pm
Location: NSW south coast

Re: What's on your workbench?

Post by Spanner »

Faded like the photo below?
Attachments
k3.jpg
k3.jpg (55.99 KiB) Viewed 650 times
If "The System" is the answer, who asked such a bloody stupid question?
DougM
PurpleBot
Posts: 835
Joined: Tue Jul 20, 2021 9:35 pm

Re: What's on your workbench?

Post by DougM »

Direct sunlight. Yep, so they look almost a very pale yellow brown. But by that stage, seams are going, holes etc.
tim.w
Jezebel
Posts: 2899
Joined: Wed Sep 13, 2017 2:21 am
Location: York

Re: What's on your workbench?

Post by tim.w »

Saw a good video where the guy discusses the variance in all the kit/webbing colours too. Seems anything goes really.
Post Reply