Those are bloody beautiful!
What's on your workbench?
Re: What's on your workbench?
My wargames blog: http://www.jemimafawr.co.uk/
Re: What's on your workbench?
Thanks Chaps. The flats have had a bit more obsessive fettling since the picture, especially the standards.
Your 40mm are looking very nice Doug. How many will succumb? ☺
Neil
Your 40mm are looking very nice Doug. How many will succumb? ☺
Neil
Neil
Blog: http://aufklarungsabteilung.blogspot.com/
Blog: http://aufklarungsabteilung.blogspot.com/
Re: What's on your workbench?
My goodness, you have been a busy boy!
- BaronVonWreckedoften
- Grizzly Madam
- Posts: 9262
- Joined: Thu Sep 14, 2017 5:32 pm
- Location: The wilds of Surrey
Re: What's on your workbench?
Geez!!! He's actually "ghost painted" scrim netting on the bloody helmets. It's enough to make a mere mortal give up and chuck all his figures in the bin.....
The flats were impressive enough, that was just sublime!
Kein Plan überlebt den ersten Kontakt mit den Würfeln. (No plan survives the first contact with the dice.)
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
- BaronVonWreckedoften
- Grizzly Madam
- Posts: 9262
- Joined: Thu Sep 14, 2017 5:32 pm
- Location: The wilds of Surrey
Re: What's on your workbench?
Wow. Just.....wow.
Kein Plan überlebt den ersten Kontakt mit den Würfeln. (No plan survives the first contact with the dice.)
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
Re: What's on your workbench?
What the Baron said.....wow!
Re: What's on your workbench?
There's some very talented chaps on this board.
Bastards.
Doug, those horse-botherers are excellent, mate. Mark, thanks for the tally-up. So there's still a couple of national contingents that you haven't done, then?
Bastards.
Doug, those horse-botherers are excellent, mate. Mark, thanks for the tally-up. So there's still a couple of national contingents that you haven't done, then?
If "The System" is the answer, who asked such a bloody stupid question?
Re: What's on your workbench?
Her Majesty's Inspector General of Artillery and Engineers is pleased to report that construction work has finally begun on the fortress of Jemimafawrenberg...
These are the old Ian Weekly 15mm 'Vaubanesque' models, which I was very pleased to discover (via this very page) are now available from TSS. These are now rather ancient models and so instead of going 'all-in', I bought a few sample pieces to start - a very nice (and large!) 'ravelin', a length of wall with gate and a length of wall with 90-degree angle (which I will use as a 'lunette'). Here they are drying on the draining-board at work (the sight of which raised my boss' eyebrows when he came in for a visit, but he's seen me do far worse...).
The moulds do seem to be a little 'tired', which is a shame, but not excessively so and not entirely unsurprising given the age of the models. They look really great now I've sprayed them with primer. I've actually seen far worse casting quality on some new ranges! I have already therefore, ordered some more pieces and should have a 'proper' fortress ready for the Christmas game, with a few bastions, curtain walls and ravelins.
However, I didn't like the gateway, which is just a boring, square hole. I've therefore hacksawed that section out of the wall and have added the rather spiffing Vaubanesque gateway by Total Battle Miniatures (TBM), which looks perfect.
I'm really looking forward to getting Jemimafawrenberg on the table! I know that a lot of my wargaming friends won't be interested, but it's the fort that counts...
These are the old Ian Weekly 15mm 'Vaubanesque' models, which I was very pleased to discover (via this very page) are now available from TSS. These are now rather ancient models and so instead of going 'all-in', I bought a few sample pieces to start - a very nice (and large!) 'ravelin', a length of wall with gate and a length of wall with 90-degree angle (which I will use as a 'lunette'). Here they are drying on the draining-board at work (the sight of which raised my boss' eyebrows when he came in for a visit, but he's seen me do far worse...).
The moulds do seem to be a little 'tired', which is a shame, but not excessively so and not entirely unsurprising given the age of the models. They look really great now I've sprayed them with primer. I've actually seen far worse casting quality on some new ranges! I have already therefore, ordered some more pieces and should have a 'proper' fortress ready for the Christmas game, with a few bastions, curtain walls and ravelins.
However, I didn't like the gateway, which is just a boring, square hole. I've therefore hacksawed that section out of the wall and have added the rather spiffing Vaubanesque gateway by Total Battle Miniatures (TBM), which looks perfect.
I'm really looking forward to getting Jemimafawrenberg on the table! I know that a lot of my wargaming friends won't be interested, but it's the fort that counts...
My wargames blog: http://www.jemimafawr.co.uk/
Re: What's on your workbench?
I thank you, but it's not as impressive as you think......BaronVonWreckedoften wrote: ↑Wed Sep 18, 2024 6:53 pmGeez!!! He's actually "ghost painted" scrim netting on the bloody helmets. It's enough to make a mere mortal give up and chuck all his figures in the bin.....
The flats were impressive enough, that was just sublime!
I have just mastered a technique which brings out the detail.
First, Contrast paint applied as a wash.
Then Army Painter ink wash - in this case Strong Tone.
Then highlights as in the first photo. The helmets with scrim were painted darker (Aggros Dunes IIRC) and drybrushed with buff acrylic from Vallejo. Too heavy, put a bit more wash on.
Neil
Neil
Blog: http://aufklarungsabteilung.blogspot.com/
Blog: http://aufklarungsabteilung.blogspot.com/