Thicker girth around the shaft?

For your Wargames Wittering
tim.w
Jezebel
Posts: 2899
Joined: Wed Sep 13, 2017 2:21 am
Location: York

Thicker girth around the shaft?

Post by tim.w »

Anyone know anywhere that does spears thicker than the usual wire spears?
User avatar
Jeremy
Grizzly Madam
Posts: 9735
Joined: Wed Sep 13, 2017 6:29 am
Location: Purgatory

Re: Thicker girth around the shaft?

Post by Jeremy »

Northstar have various ones. Their long, steel ones are thicker than the copper ones
FreddBloggs
Grizzly Madam
Posts: 3650
Joined: Wed Sep 13, 2017 9:39 am
Location: left forum

Re: Thicker girth around the shaft?

Post by FreddBloggs »

have you tried existing ones with the pills they send you emails about?
User avatar
goat major
Grizzly Madam
Posts: 6645
Joined: Sun Sep 10, 2017 10:32 pm
Location: North Yorkshire
Contact:

Re: Thicker girth around the shaft?

Post by goat major »

Essex do cast spears - they are most probably thicker than wire
Goaty bloggy thing http://goatmajor.org.uk
Goaty twitty thing http://www.twitter.com/GoatMajor
User avatar
Essex Boy
Grizzly Madam
Posts: 6508
Joined: Mon Sep 11, 2017 4:22 pm
Location: South Essex
Contact:

Re: Thicker girth around the shaft?

Post by Essex Boy »

You can buy brass rod in various thicknesses from good model shops. The shop under the city wall in York should have a selection. Just hammer the end flat and shape with a file. Or, piano wire....but with that a Dremel or similar would be rather handy.

E
User avatar
Zenbadger
Gaynor
Posts: 1137
Joined: Tue Sep 12, 2017 6:51 pm
Location: Derbyshire, land of tarts and plague
Contact:

Re: Thicker girth around the shaft?

Post by Zenbadger »

Amazon do 1.5mm aluminium craft wire which I use when I am not using plastic bristles. Cut it to length, roll it on a flat board with a rough metal file (this straightens it and leaves a nice texture), crimp the business end flat with pliers and shape a point with a needle file or similar.
Etranger
Jezebel
Posts: 2494
Joined: Wed Sep 13, 2017 10:10 am
Location: The Athens of the South

Re: Thicker girth around the shaft?

Post by Etranger »

Essex Boy wrote: Fri Sep 02, 2022 5:54 pm You can buy brass rod in various thicknesses from good model shops. The shop under the city wall in York should have a selection. Just hammer the end flat and shape with a file. Or, piano wire....but with that a Dremel or similar would be rather handy.

E
Piano wire is a lot harder (literally) to work with than brass. I managed to bugger up some good tools trying to cut & shape piano wire.
User avatar
grizzlymc
Grizzly Madam
Posts: 9619
Joined: Wed Sep 13, 2017 9:33 am
Location: Sunny Sydney
Contact:

Re: Thicker girth around the shaft?

Post by grizzlymc »

And then, if someone leans on your spears, they stop leaning immediately.
User avatar
Essex Boy
Grizzly Madam
Posts: 6508
Joined: Mon Sep 11, 2017 4:22 pm
Location: South Essex
Contact:

Re: Thicker girth around the shaft?

Post by Essex Boy »

Etranger wrote: Sat Sep 03, 2022 1:49 am
Essex Boy wrote: Fri Sep 02, 2022 5:54 pm You can buy brass rod in various thicknesses from good model shops. The shop under the city wall in York should have a selection. Just hammer the end flat and shape with a file. Or, piano wire....but with that a Dremel or similar would be rather handy.

E
Piano wire is a lot harder (literally) to work with than brass. I managed to bugger up some good tools trying to cut & shape piano wire.
Very true. A Dremel (or similar) is your friend. A serious pair of pliers is also a must.

Personally, I prefer piano wire, because my terrible OCD makes me worry about brass rod bending.....which it does. Quite easily.
FreddBloggs
Grizzly Madam
Posts: 3650
Joined: Wed Sep 13, 2017 9:39 am
Location: left forum

Re: Thicker girth around the shaft?

Post by FreddBloggs »

Admit it your troops have piano wire, so once routed they can build a piano while the other players carry on the game.
Post Reply