Snow basing?

For your Wargames Wittering
tim.w
Jezebel
Posts: 2895
Joined: Wed Sep 13, 2017 2:21 am
Location: York

Snow basing?

Post by tim.w »

Anyone done it? I have some snow from warlord but it never looks that good? Anyone have any recommended techniques? It'll just be for figure basing, my tanks are mostly done.
User avatar
Jeremy
Grizzly Madam
Posts: 9735
Joined: Wed Sep 13, 2017 6:29 am
Location: Purgatory

Re: Snow basing?

Post by Jeremy »

Mix it with wood glue till it’s lumpy and clumpy and then apply to the base
User avatar
Paul
Grizzly Madam
Posts: 4621
Joined: Fri Oct 13, 2017 11:39 pm

Re: Snow basing?

Post by Paul »

Baking soda and PVA slurry. Add some white craft paint for opacity. Water it down for slushy consistency or leave it thick for the piled on look.
Has the advantage of being able to represent different types and thicknesses from slush to drifts depending on the proportions you mix up. Looks good with tufts poking through too :)
Last edited by Paul on Wed Nov 29, 2017 11:12 pm, edited 1 time in total.
User avatar
World2dave
Jezebel
Posts: 2591
Joined: Mon Sep 11, 2017 9:31 am
Location: In the Middle
Contact:

Re: Snow basing?

Post by World2dave »

Does it have to be proper deep snow? People do seem to like it as they get to buy expensive specialist modelling materials. Otherwise, just dry-brush your usual brown/green with white. It'll look nice and cold, and let's face it, with troops and possibly vehicles around, virgin snow doesn't stay that way for long.

I know... Gasp, horror! - not using proper modelling techniques! I'll get me coat.
User avatar
Essex Boy
Grizzly Madam
Posts: 6504
Joined: Mon Sep 11, 2017 4:22 pm
Location: South Essex
Contact:

Re: Snow basing?

Post by Essex Boy »

What Dave says.

But also.......

Superfine powdered filler. Mix to the manufacturer's recommended consistence but err on the side of 'just a little too wet' because you don't want it to peak when you spread it. Substitute PVA for a little of the water when mixing because it improves the bond to the base. Don't apply too thick otherwise it might craze but you're unlikely to get a flat finish if you try to add a second coat.
You can push tracks into the 'snow' when it's almost dry.
User avatar
levied troop
Grizzly Madam
Posts: 3760
Joined: Tue Sep 12, 2017 7:05 pm
Location: I’m in the phone box, the one across the hall

Re: Snow basing?

Post by levied troop »

What Paul says.

And what Dave says about snow after troops and tanks have been through it. My 1814 stuff is getting mud on the troop bases and Paul’s approach on the surrounding terrain.

If you are looking for deep virgin snow, a very tiny amount of sugar sprinkled on carefully post-varnish gives you a certain frosty twinkle.
I get lockdown, but I get up again.
User avatar
Purple
Grizzly Madam
Posts: 3716
Joined: Tue Sep 12, 2017 8:53 pm
Location: Purpsdam
Contact:

Re: Snow basing?

Post by Purple »

https://www.precisioniceandsnow.com

The snow dioramas in military modelling were always my favourite.
User avatar
Essex Boy
Grizzly Madam
Posts: 6504
Joined: Mon Sep 11, 2017 4:22 pm
Location: South Essex
Contact:

Re: Snow basing?

Post by Essex Boy »

The snow in Essex stays picture perfect no matter what.
User avatar
BaronVonWreckedoften
Grizzly Madam
Posts: 9262
Joined: Thu Sep 14, 2017 5:32 pm
Location: The wilds of Surrey

Re: Snow basing?

Post by BaronVonWreckedoften »

The snow in Plaistow, stays mainly on the toe.
Kein Plan überlebt den ersten Kontakt mit den Würfeln. (No plan survives the first contact with the dice.)
Baron Mannshed von Wreckedoften, First Sea Lord of the Bavarian Admiralty.
User avatar
goat major
Grizzly Madam
Posts: 6644
Joined: Sun Sep 10, 2017 10:32 pm
Location: North Yorkshire
Contact:

Re: Snow basing?

Post by goat major »

Essex Boy wrote: Thu Nov 30, 2017 8:34 am The snow in Essex stays picture perfect no matter what.
i agree Essex looks much better when covered over
Goaty bloggy thing http://goatmajor.org.uk
Goaty twitty thing http://www.twitter.com/GoatMajor
Post Reply