Priming metal bases

[Jeremy]

I used to stick the figure on with contact adhesive and then the base would receive the same spray coat as the figure

[Neanderthal]

I base on Wilko's washers, I lightly key the top with emery paper, tack the figure down with a small blob of contact glue (UHU from poundshop) and then run cheap superglue round the edges of the figure base. I spray prime all my figures with Halfords primer. Once the figure is painted I put a thin layer of contact glue on the washer around the figure base to key on the filler being sure to get to the edges. I used the same method with coins till I discovered that washers were cheaper and easier to obtain in quantity. My figures have led a rough life and to date I have had no problems with the bases or basing chipping or coming off.

[FreddBloggs]

I use washers or coins all the time and have never found the need to prime them. But I use a plastic woodfiller for texturing, and that sticks to everything.

[Essex Boy]

I use proper, mdf, bases.

[valleyboy]

[quote="Essex Boy" post_id=47322 time=1577715716 user_id=53]
I use proper, mdf, bases. - lots of them in fact because I keep changing them quote]

FTFY

[Buff Orpington]

Because nobody makes triangular washers

[valleyboy]

I use proper, mdf, bases. - lots of them in fact because I keep changing them quote]

FTFY

Yeah I know GIT

[Zenbadger]

Someone asked me about the longevity of MDF bases a few weeks ago. I had to tell him that I don't know anyone who uses them for more than a year.

[Essex Boy]

I use proper, mdf, bases. - lots of them in fact because I keep changing them quote]

FTFY

Yeah I know GIT

Don't be so hard on yourself.......leave that to me.

[BaronVonWreckedoften]

My figures have led a rough life.....

We like to operate a "don't ask, don't tell" policy here......